Description
The 16-7020 is a “Multiple-Input and Multiple-Output” (MIMO) 5-band Antenna. This Antenna is engineered to reach the LTE, WiFi, DSRC, Bluetooth, and GPS networks and yields maximum coverage at each bands edge. The IP67 compliant design provides the best protection against water and/ or dust migration under severe environmental conditions. Each cable has a high performing, low loss, exceptional quality connector for maximum RF system efficiency. The ABS plastic radome housing is built using only 100% tested materials against extreme UV rays.
| CELLULAR/4G LTE (cable 1) | |
|---|---|
| Standards | 2G,3G and 4G |
| Frequency | 690-960, 1710-2170, 2500-2700 MHz |
| VSWR | < 1.5 : 1 |
| Gain (typical) | 1.5 – 2.5 dBi |
| Impendence (Ohm) | 50 Ohms |
| Polarization | Vertical |
| Max. Input Power (W) | 50 watts |
| GPS (cable 2) | |
|---|---|
| Standards | GPS |
| Frequency | 1575.42, |
| VSWR | < 1.5 : 1 |
| Impendence (Ohm) | 50 Ohms |
| Polarization | RHCP |
| Gain (typical) | 28±4.5dB |
| Voltage (V) | 3 – 5 volts |
| Power Consumption (mA) | 3.0 V Typical:13mA. Max:16mA 5.0 V Typical: 18mA. Max:22mA |
| Out of Band Rejection (dB) | ±20Mhz 7dB MIN ±30Mhz 12dB MIN ±50Mhz 20dB MIN ±I00Mhz 30dB MIN |
| BlueTooth (cable 3) | |
|---|---|
| Standards | WiFi, BT, ZigBee, ISM |
| Frequency | 2400-2500 MHz |
| VSWR | < 1.5 : 1 |
| Gain (typical) | 1.5 – 2.5 dBi |
| Impendence (Ohm) | 50 Ohms |
| Polarization | Vertical |
| Max. Input Power (W) | 50 watts |
| 5.8 GHz DSRC (cable 4) | |
|---|---|
| Standards | DSRC |
| Frequency | 5800 – 6000 MHz |
| VSWR | < 1.5 : 1 |
| Gain (typical) | 1.5 – 2.5 dBi |
| Impendence (Ohm) | 50 Ohms |
| Polarization | Vertical |
| Max. Input Power (W) | 50 watts |
| 2.4 GHz WiFi (cable 5) | |
|---|---|
| Standards | WiFi, BT, ZigBee, ISM |
| Frequency | 2400-2500 MHz |
| VSWR | < 1.5 : 1 |
| Gain (typical) | 1.5 – 2.5 dBi |
| Impendence (Ohm) | 50 Ohms |
| Polarization | Vertical |
| Max. Input Power (W) | 50 watts |
